Congratulations on choosing Tap And Wrap to protect your windshield from rock chips and more! We’ve compiled this concise guide to help you maintain the pristine condition of your XPEL windshield protection film and ensure optimal protection and clarity.
XPEL has recently released it’s own line of windshield protection film. It’s designed to protect your windshield against chips, cracks, and road debris. With UV protection and brilliant clarity, XPEL windshield film comes with simple and easy maintenance.
Initial Care
- Post-Installation: After installation, avoid washing your vehicle for at least 48 hours to allow the film to adhere and cure. XPEL also recommends purchasing and installing a new set of premium windshield wiper blades.
Washing Guidelines
- Hand Washing: We recommend hand washing your vehicle using XPEL Wash Solution or Foam Soap and a soft microfiber mitt. Rinse thoroughly with water.
- Pressure Washing: Keep the nozzle at least 36 inches (1 meter) away from the film when using a pressure washer. Avoid spraying directly at the edges of the film to prevent lifting. We recommend using a 40-degree nozzle.
- Avoid Harsh Chemicals: Do not use strong chemicals, solvents, or abrasive cleaning tools on the film, as these can damage the protective coating.
- Drying: Always dry the vehicle with a clean, soft microfiber towel to avoid water spots. Avoid letting the vehicle air-dry in direct sunlight.
Stain and Contaminant Removal
- Bird Droppings & Bug Splatter: Remove contaminants like bird droppings and bug splatter as soon as possible to prevent staining. Use warm water and a pH-neutral soap. In an emergency on-the-go, you can apply XPEL SiO2 Waterless Wash to the affected area and wipe off with a microfiber towel.
- Tree Sap & Tar: For stubborn contaminants like tree sap and tar, use a 50/50 water and isopropyl alcohol mixture in a spray bottle. Spray directly onto a microfiber towel and wipe the affected area.
Film Maintenance
- Regular Cleaning: Clean the film regularly with XPEL Wash Solution or Foam Soap included in the XPEL TPU Windshield Film Maintenance Kit to maintain clarity and appearance.
- Avoid Waxing: Do not apply waxes or polishes that contain dyes, abrasive compounds, or solvents directly onto the film.
Winter Care
- Snow and Ice Removal: Avoid using sharp tools or metal scrapers to prevent film damage.
Important Notes
- Wiper Blades: We recommend replacing your windshield wiper blades regularly to prevent scratches or damage to the film.
By following these guidelines you can ensure the longevity and performance of your XPEL Windshield Film, keeping your vehicle protected and looking its best.
